FLORIDA DEPARTMENT OF TRANSPORTATION

 

2016 SPECIFICATIONS

SECTION 430

PIPE CULVERTS

SECTION 449

PRECAST CONCRETE DRAINAGE PRODUCTS

 

2016 DRAINAGE MANUAL

CONCRETE PIPE

MINIMUM COVER HEIGHT

ROUND CONCRETE PIPE

FILL HEIGHT TABLE

ELLIPTICALCONCRETE PIPE FILL HEIGHT TABLE

CONSTRUCTION PROJECT ADMINISTRATION MANUAL

SECTION 8.13

PIPE INSPECTION, EVALUATION & REPAIR

PIPE REPAIR MATRIX

ASTM Standards are copyrighted and therefore not available through the FCPI website. Standards can be purchased directly through ASTM or ACPA.

 

ASTM Standards are also available by contacting any FCPI member.

ASTM


C 14 Standard Specification for Non-reinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C 31 Standard Practice for Making and Curing Concrete Test Specimens in the Field
C 33 Standard Specification for Concrete Aggregates
C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C 40 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C 42 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C 76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C 118 Standard Specification for Concrete Pipe for Irrigation or Drainage
C 136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C 138 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C 143 Standard Test Method for Slump of Hydraulic-Cement Concrete
C 150 Standard Specification for Portland Cement
C 172 Standard Practice for Sampling Freshly Mixed Concrete
C 173 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C 231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C 361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C 403 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C 412 Standard Specification for Concrete Drain Tile
C 443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C 444 Standard Specification for Perforated Concrete Pipe
C 478 Standard Specification for Precast Reinforced Concrete Manhole Sections
C 494 Standard Specification for Chemical Admixtures for Concrete
C 497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C 505 Standard Specification for Non-reinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C 506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C 507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C 595 Standard Specification for Blended Hydraulic Cements
C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C 654 Standard Specification for Porous Concrete Pipe
C 655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C 805 Standard Test Method for Rebound Number of Hardened Concrete

C 822 Standard Terminology Relating to Concrete Pipe and Related Products
C 877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C 913 Standard Specification for Precast Concrete Water and Wastewater Structures
C 923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C 924 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Withdrawn 2013)
C 969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C 985 Standard Specification for Non-reinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C 989 Standard Specification for Slag Cement for Use in Concrete and Mortars
C 990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C 1064 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C 1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C 1116 Standard Specification for Fiber-Reinforced Concrete
C 1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C 1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C 1227 Standard Specification for Precast Concrete Septic Tanks
C 1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
C 1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C 1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design

C 1443 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C 1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C 1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C 1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C 1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C 1602 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C 1610 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C 1611 Standard Test Method for Slump Flow of Self-Consolidating Concrete
C 1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
C 1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures
C 1621 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
C 1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C 1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
D 2240 Standard Test Method for Rubber Property—Durometer Hardness

 

AASHTO Standards are copyrighted and therefore not available through the FCPI website. Standards can be purchased directly through AASHTO or ACPA.

 

AASHTO Standards are also available by contacting any FCPI member.

AASHTO


M6, Standard Specification for Fine Aggregate for Hydraulic Cement Concrete
M80, Standard Specification for Coarse Aggregate for Hydraulic Cement Concrete
M85 (C150), Standard Specification for Portland Cement
M86 (C14), Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
M157 (C94), Standard Specification for Ready-Mixed Concrete
M170 (C76), Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
M175 (C444), Standard Specification for Perforated Concrete Pipe
M176 (C654), Standard Specification for Porous Concrete Pipe
M178 (C412), Standard Specification for Concrete Drain Tile
M194 (C494), Standard Specification for Chemical Admixtures for Concrete
M198 (C990), Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
M199 (C478), Standard Specification for Precast Reinforced Concrete Manhole Sections
M206 (C506), Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
M207 (C507), Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
M240 (C595), Standard Specification for Blended Hydraulic Cement
M241 (C685), Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
M242 (C655), Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
M259 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
M262 (C822), Standard Definitions of Terms Relating to Concrete Pipe and Related Products
M273, Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings
M295 (C618), Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
M302 (C989), Standard Specification for Slag Cement for Use in Concrete and Mortars
M315 (C443), Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
R38, Standard Practice for Quality Assurance of Standard Manufactured Materials
T22 (C39), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
T26 (C1602), Standard Method of Test for Quality of Water to Be Used in Concrete
T119 (C143), Standard Test Method for Slump of Hydraulic Cement Concrete
T121 (C138), Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
T152 (C231), Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
T255 (C566) Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
T280 (C497), Standard Method of Test for Concrete Pipe, Manhole Sections, or Tile
T309 (C1064), Standard Test Method for Temperature of Freshly Mixed Hydraulic Cement Concrete
TP073 (C1611), Standard Test Method for Slump Flow of Self Consolidating Concrete

 

AASHTO

AREMA

AREMA Standards are copyrighted and therefore not available through the FCPI website. Standards can be purchased directly through AREMA or ACPA.

 

AREMA Standards are also available by contacting any FCPI member.

AREMA Part 10 Reinforced Concrete Culvert Pipe – 2011

AREMA Part 16 Design and Construction of Reinforced Concrete Box Culverts – 2011 

 

ASCE

ASCE Standards are copyrighted and therefore not available through the FCPI website. Standards can be purchased directly through ASCE or ACPA.

 

ASCE Standards are also available by contacting any FCPI member.


ASCE 15-98 Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD

ASCE26-97 Standard Practice for Direct Design of Buried Box Sections

ASCE 27-00 Standard Practice for Direct Design of Precast Concrete Pipe for Jacking in Trenchless Construction

ASCE 28-00 Standard Practice for Direct Design of Precast Concrete Box Sections for Jacking in Trenchless Construction

 

  • Facebook App Icon
  • Twitter App Icon
  • LinkedIn Social Icon
  • YouTube Social  Icon

© 2017 FLORIDA CONCRETE PIPE ASSOCIATION. ALL RIGHTS RESERVED.